AEON FOIL BACK WINGS

OVERVIEW

“DNA-H” (hard) only for the most stability and control in all conditions. The special profile and shape of the backwings allow us to use low angles of attack on the stabilizers without losing control and flight stability. The whole foil system is working as one. Our backwings are carefully finetuned to work best with our fuselage shapes and frontwings.

• 150: Surface 150cm2, Span 340mm, Aspect Ratio 7.70 
• 160: Surface 160cm2, Span 380mm, Aspect Ratio 9.03
• 175: Surface 175cm2, Span t.b.c., Aspect Ratio t.b.c.
• 195: Surface 195cm2, Span 420mm, Aspect Ratio 9.05

  
  (Bigger sizes for Windsurf and Wingfoil Wave / Freestyle and Freeride to come 2025.)

CONSTRUCTION

To protect the advantage of having the stiffest and thinnest parts we won’t name any construction secrets used for our backwings. All foil parts are using TX40 screwheads. The backwing is being mounted with two M6 bolts.

SANDING AND WARRANTY:
All AEON carbon parts have a "clear cote finish" to look optically appealing and perfect. This coating is sealing the carbon layers. Please note that sanding off this factory coating - partially or completely - will end the product warranty and any sanding will be fully at your own risk. Always get some advise and guidance from experienced racers before sanding your foil parts. There is no general need to extensively sand the AEON carbon parts as we're using a very advanced production process. Only do so if you're 100% sure about what you're doing and why you're doing it.