SKYSCAPE 2024/25

Skyscape, the personal choice of Loftsails' chief sail designer Monty Spindler, is a sail designed to provide versatility, lightness, and pure enjoyment in freefoil sailing.

With its high-aspect design, Skyscape perfectly balances the low drag of the hydrofoil. It features a shorter boom and no cams, allowing for effortless flipping during transitions without disrupting the board's delicate trim.

The current range of Skyscape sails has been expanded with the addition of new sizes: 4.2 and 4.7. These sizes are shaped with a 5-batten profile, while the other sizes maintain their stable 6-batten layout. Selected battens in each size have been revised and fine-tuned to create a more forward-oriented profile.

Skyscape sails offer a wide range of trimming options thanks to their strong luff curve and finely-tuned horizontal shapes. The double clew eyelets provide additional versatility, allowing the selected size to continue performing when others may need to change their sails.

Moreover, if foiling becomes less exciting, Skyscape sails can still be highly effective with a fin setup.

Similar to other Loftsails designs, all sail sizes below 7.0 are compatible with both RDM and SDM masts.

Features & Benefits

Full X-Ply – 5 mil biaxial luff and foot panels, 4 mil biax window panels, 3.5 mil biax leech panels, 2 mil upper body panels

Kevlar Strips: reinforced xplys worked into the sleeve top to eliminate stretch and elongation

X-ply Batten Pocket: Minimizes the asymmetric character of applied batten pockets

Varied Carbon Tubed Battens: Carbon tubes are lightweight and deliver superior stability at the upper end

Dual Clew Eyelets with Webbing: Allow adjusting leech-release characteristics to better suit sailing conditions

IYU250 4-Part Mast Pocket: Super durable IYU250 is the perfect material between your mast and the elements

Trim Diamond: A reference marker for precision leach-release tuning

Full-opening Mast Pad: Easy access to your mast extension, downhaul system and batten trim key

RDM/SDM Compatibility: SDM recommended, RDM compatible with sizes 7.0 and down

Full X-Ply – 5 mil biaxial luff and foot panels, 4 mil biax window panels, 3.5 mil biax leech panels, 2 mil upper body panels

Kevlar Strips: reinforced xplys worked into the sleeve top to eliminate stretch and elongation.